logo
 
 
 
  Site : Home > Technical
 
     
 
 
The chemical resistance of the perfluorinated products
Chemical resistance of FFKM-Lsbraz products (volume change)

Drug Class

Test conditions

FFKM-Lsbraz (Ternary class of FKM)

(Dual class FKM

)

(Inorganic acids, organic acids)
Hydrochloric acid(35%) 40℃×21d A A B
Sulfuric acid(35%) 40℃×10d A A A
Sulfuric acid(98%) 40℃×11d A A A
Nitric acid (60%) 40℃×10d A A D
Hydrofluoric acid(50%) 40℃×10d A A B
Glacial acetic acid 40℃×21d A D D
B (acid) anhydride 40℃×21d A D D
Formic acid(88%) 40℃×21d A (C) (D)
(Inorganic alkali)
Sodium hydroxide(30%) 40℃×8d A C (侵蝕)
Sodium hydroxide(31%) 40℃×21d A D (侵蝕)
Sodium hypochlorite(10%) 40℃×21d A B C
Ammonia (28%) 25℃×21d A D D
Ammonia (28%) 40℃×21d A D D
(Ketones, esters, ethers)
Acetone 40℃×21d A D (D)
Methyl - ethyl ketone 40℃×21d A D (D)
Methyl - iso-butyl ketone 40℃×21d A D (D)
Isophorone 40℃×21d A D (D)
The two-Gan carbonate (diethyl carbonate) 40℃×21d A D (D)
Acetylacetone 40℃×21d A D (D)
Methyl 40℃×21d A D (D)
Methyl acetate 40℃×21d A D (D)
Methyl acetate 40℃×21d A D (D)
Isoamyl Acetate 40℃×21d A D (D)
Methyl acetoacetate 40℃×21d A D (D)
Methyl acetoacetate 40℃×21d A D (D)
Acrylic acid 40℃×21d A D (D)
Methacrylate 40℃×21d A D (D)
Glycol diethyl 40℃×21d A D (D)
Dimethyl maleate 40℃×21d A D (D)
Triethyl phosphate 40℃×21d A B (D)
O-cresyl ester 40℃×21d A B (D)
(B) ether 40℃×21d B D (D)
1,4 - dioxane 40℃×21d A D (D)
Methyl-t-dibutyl ether 40℃×21d B D (D)
(Furans, aldehydes)
Tetrahydrofuran 40℃×21d B D D
2 - methyl-THF 40℃×21d B D D
Acetaldehyde 25℃×21d B D D
Furfural 40℃×21d A (C) (C)
Furfural 100℃×7d A (B) (D)
Acetophenone 40℃×21d A (C) (D)
Formalin(35%) 40℃×21d A (B) (C)
Formaldehyde 40℃×21d A D D
(Nitrogen compounds)
Vinyl nitrile 40℃×10d A A B
Ethylenediamine 40℃×10d A D D
Ethylenediamine 40℃×21d A D D
Triethylenetetramine 40℃×21d A D D
Aniline (Ani Lin) 40℃×21d A D D
Pyridine (TRIAZING) 40℃×21d A C D
N, N1-dimethylformamide 40℃×21d A D D
N, N2,-dimethyl acetamide 40℃×21d A D D
N-methyl - 2 - pyridyl oxazolidinone 100℃×21d A D D
1,8-diabazaicyclo[5,40]undecylen 40℃×7d A D D
(Hydrocarbons, halogenated hydrocarbons)
n-oxide 40℃×21d A B B
Cyclohexane 40℃×21d B B B
Isooctane 40℃×21d B B B
Naphthalene alkyl 40℃×21d A B B
Benzene 40℃×21d A C D
Toluene 40℃×21d A B C
Xylene 40℃×21d A B C
Ethylbenzene 40℃×21d A B B
Nitrobenzene 40℃×21d A B B
A chlorotoluene 40℃×21d A B C
1,2 - dichlorobenzene 40℃×21d A B C
Chloroform 40℃×21d A C D
Carbon tetrachloride 40℃×21d B C D
Dichloroethane 25℃×21d A C D
Trichlorethylene 40℃×21d A B C
PCE 40℃×21d B B C
PCE 100℃×7d B B C
1,2 - dibromoethane 40℃×21d A B B
R-113 25℃×11d D D C
R-112 40℃×11d C C C
DieFloyl#10(Fluorine oil) 130℃×11d C C C
DieFloyl#1 (Fluorine oil) 40℃×21d C C C
Fluoride FC77 100℃×7d D C B
Nobeccu HFE7100 23℃×3d C C B
(Alcohols)
Methanol 40℃×21d A B D
Ethanol 40℃×21d A A B
Isopropanol 40℃×21d A A A
Glycol 40℃×21d A A A
Glycol 130℃×10d A (A) (B)
Jiajika alcohol (methyl - ethoxyethanol) 40℃×21d A A (B)
B Kika alcohol (ethyl - ethoxyethanol) 100℃×7d A (B) (B)
Cyclohexanol 40℃×21d A A (B)
(Other, oil, steam class)
Coatings are believed to water 32℃×28d A D D
Firequer 130℃×11d A A B
Firequer 175℃×3d A (B) (B)
DN cut HS-1(cutting oil) 130℃×11d A (B) (D)
Esso Unifuluoro 175℃×20d A (B) (C)
O-148LCT (AirCraft engine oil) 175℃×20d A (B) (C)
Jis No.1 Oil(oil) 175℃×16d A A A
ASTEM No.3 Oil(oil) 175℃×16d A A B
50%LLCaqueous solution (Toyota) 130℃×16d A A B
Steam 150℃×30d A A (D)
Steam 190℃×3Od A B D
95% hot water 95℃×21d A A C
A:The volume rate of increase of less than      5%以下         ◎:completely suitable for
B:The volume rate of increase of less than      5%~ 20%         ○:conditionally suitable
C:The volume rate of increase of less than      20%~ 50%         △:used to note
D:The volume rate of increase of less than     not less than 50%          X:Do not
■ The above data are obtained from specimens in the solution by soaking the product into solvent, the results of references can only be taken as reference for actual use. In addition, with the brackets, according to its structure and material manufacturers data obtained inference results. Since the majority of users have different working environment, therefore, please contact us for consultation before  actual use of our products. In general, the hydrocarbon-based drugs have the carbon content of different sizes, the smaller the carbon content, the expansion of the stronger the effect.
 
     
 
Home | Mail | Message | Contact Us   Copyright Best Ring Technology Co., Ltd ,All Rights Reserved.2010-2020 TEL:0086-021-57510551